111S08080090C34 Category 6 RJ45 Plug for Larger Size Conductors (.044″-.048″) w/ patented Conductive NEXT Reduction System

Features

For ABA Elite 1000X Cat 6 400 MHz 24 AWG Stranded CM Patch Cables – .272″ OD
Shielded RJ45 plug with integral “C CRIMP” for increased shield effectiveness, added cable stress relief and additional strength
Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing precise conductor alignment, the composite carbon/graphite fiber conductor load bar greatly reduces NEXT and return loss by absorbing reflections and channeling it away from the conductors. Using recommended termination procedures and equipment, ANSI/TIA 568.2-E Category 6A/6 performance levels are achievable with good workmanship and certified cables.
Utilizes a 4 over 4 contact design (4 LONG and 4 SHORT) that provides increased isolation and spatial dispersion within the plug to minimize crosstalk and accepts .044″ – 048″ insulated conductor OD.
The conductors are isolated by the Conductor Load Bar and through Plastic Isolation/Insulation Barriers where contact termination is made, thereby improving electrical performance.
Plug accepts both SOLID and STRANDED conductors
Made in USA

Performance: Meets or Exceeds ANSI/TIA 568.2-E – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
Contact Material: Phosphor Bronze – .012″ thick
Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
Plug Material: Polycarbonate
Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
UL Recognized: UL File #E188111 – UL 1863 (1000v)
Flame Autoextinguish: 94V-0
Operating Temperature: -40º C to +85º C
Insertion/Extraction Life: 1000 Minimum Cycles
Contact Resistance: 10 Milli-Ohms maximum
Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
Compliance: RoHS Compliant
PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

Fill out the form and a member of our team will reach out to assist you.

If not using the quote builder, please include your part number, description and quantity.

Need to send us a message? Fill out our general inquiry form.

"*" indicates required fields

If you have questions or need immediate assistance, give us a call today!

Mon-Fri: 8am-5pm

Tel: 717.843.4240

Fax: 717.848.1949