111S08080054H34 Category 6A/6 RJ45 Plug For .037″-.042″ Insulated Conductors and Cable Jackets up to .310″ w/ Patented Conductive NEXT Reduction System

  • Shielded
  • Cat 6/6A
  • High-Speed
  • Made in
    the USA
  • Round cable
  • Solid or stranded
    wire applications
  • .037″ - .042″
    conductor OD

Features

  • Shielded RJ45 plug with integral “C CRIMP” for added cable stress relief and additional strength. Accepts up to .037″-.042″ INSULATED Conductor ODs and up to a .310″ cable jacket OD
  • Incorporates a PATENTED CONDUCTIVE NEXT Reduction System. In addition to providing PRECISE CONDUCTOR ALIGNMENT, the Composite Carbon/Graphite Fiber Conductor Load Bar GREATLY REDUCES NEXT and RETURN LOSS by ABSORBING REFLECTIONS and CHANNELING IT AWAY FROM THE CONDUCTORS. Using recommended termination procedures and equipment, ANSI/TIA-568.2-D Category 6A performance levels are achievable with good workmanship and certified cables.
  • Two piece design provides proper conductor feedthrough and precise alignment to insure consistent terminations and electrical performance measurements.
  • The conductors are isolated by the Conductor Load Bars and through Plastic Isolation/Insulation Barriers at the front of the plug.
  • Plug accepts both SOLID or STRANDED conductors
  • Made in USA

Specifications

  • Performance: Meets or Exceeds ANSI/TIA 568.2-D – ANSI/TIA 1096 (Formerly FCC Part 68) – ANSI/TIA 968-A – CENELEC EN 50173 – IEC 60603 – ISO-8877 – ISO/IEC 11801
  • Contact Material: Phosphor Bronze – .012″ thick
  • Contact Plating: Minimum 50 Micro-Inch Pure Gold – Selective 24 Carat Hard Gold Plate in contact area over 100 Micro-Inch minimum Nickel Plate. Exceeds TIA-1096 specifications (formerly FCC Part 68)
  • Plug Material: Polycarbonate
  • Plug Tolerances and Dimensions: Meets TIA-1096 specifications (formerly FCC Part 68)
  • UL Recognized: UL File #E188111 – UL 1863 (1000v)
  • Flame Autoextinguish: 94V-0
  • Operating Temperature: -40º C to +85º C
  • Insertion/Extraction Life: 1000 Minimum Cycles
  • Contact Resistance: 10 Milli-Ohms maximum
  • Current/Voltage: 30 VAC/57 VDC at 1.5 Amps
  • Compliance: RoHS Compliant
  • PoE: Meets requirements of 15W PoE (IEEE 802.3af), 30W PoE+ (IEEE 802.3at), 60W PoE++ (IEEE 802.3bt Type 3) and 100W PoE++ (IEEE 802.3bt Type 4)

Resources

Need a quote?

Fill out the form and a member of our team will reach out to assist you.

If not using the quote builder, please include your part number, description and quantity.

Need to send us a message? Fill out our general inquiry form.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

If you have questions or need immediate assistance, give us a call today!

Mon-Fri: 8am-5pm

Tel: 717.843.4240

Fax: 717.848.1949

Add PN to RFQ?